Gary's Metal Detecting Forum
Gary's Detecting forum => General detecting talk => Topic started by: brickie on August 06, 2018, 08:33 pm
-
I seem to digging more bigger iron and hot rocks with the hf coil and the lf coil on v5 anyone else noticed this?
-
Are you sure it is Hot rock, what XY screen reading do they give.
Also what ground balance are you using.
-
hi gary I used gb at 90 but on other fields have used pump gb doesn't seem to make any difference in what gb I use have not tried xy, will do next time and yes its hot rocks not coke etc. large iron not huge pieces sound good with a bit of iron buzz but found a brass rifle casing that sounded like iron but with a little bit of high tone so I thought I would dig it anyway and was surprised to see a brass case ? I did not dig as much iron in 4.1 version with your ultimate program it was either iron buzz or good tone.thanks.
-
Interesting, hot rock should never be detected (with a high tone) with GB at 90. Perhaps it is something else.
The XY should be dead flat -left right on HRock. Coke is the opposite - up down
As far as I am aware no settings have changed from 4.1 to 5.1.
-
Will give it a try with XY screen on weekend thanks
-
Crikey.....give me a beep and dig any day. :D
-
:) I've had the same thing on v5 recently, GB 90 although did not try the XY screen. Will try it with the XY screen this weekend.
-
Try Sifter.
Happy Hunting,
Jerry.