Gary's Metal Detecting Forum

Gary's Detecting forum => General detecting talk => Topic started by: coil on November 30, 2015, 10:04 pm

Title: mdf xp day
Post by: coil on November 30, 2015, 10:04 pm

Thanks gary for great day in Norfolk yesterday we talked about hot programme I ment to say about ground balance when using hot programme if you have to cheers

Title: Re: mdf xp day
Post by: Gary on November 30, 2015, 10:12 pm

Hi mate
The key is to watch your ground mineralisation bar, if it goes above half way then ground balance, if it don't move, and it probably won't in the UK then leave it at the lower end of 90,

Title: Re: mdf xp day
Post by: coil on December 01, 2015, 09:27 am

Thank you gary