Garys Detecting.co.uk
Latest metal detecting headphones, headphone information and pictures.


Sprite Digitals are as good as you're going to get they are very comfortable with excellent build quality.
The deep ear cups eliminate almost all background sound, the cushions are slightly vented which  allows air to circulate around the ear.
Available in Grey or Black
Digitals have a nice bright sound... originally designed for the more specialist detectorist using single frequency machines such as the Lobo, Gold Maxx power V4, MXT and Tejon.

Fantastic for searching iron contaminated sites...perfect target seperation.
RRP £69.00
Special pre Christmas offers available
visit the sales page

 

   

OADS Evo's
The very latest OADS we have travelled through hell and high water to obtain more stock.
As like all OADS they are fitted with a strong single sided lead.

Prices around £27.00 OUT OF STOCK

Fantastic sound work well on all machines with an internal volume especially Minelabs, T2, F75, XLT, DFX, MXT etc

 

Only £27.00 OUT OF STOCK

What makes the OADS special is the vented  podium speaker pods allowing you to hear all thats around you without comprimising signal quality

 If you detect on your own in woods or confined areas the OADS vented system will allow you to hear who's creeping up on you!!

As some of you may remember the original vented OADS were very popular...and sadly almost impossible to re-stock, so grab a bargain while you have a chance.

OADS Evo's are very light and suprisingly robust providing they are used in accordance with our instructions (supplied).
Please note : OADS Evo's have no volume control so use at your own risk if your detector has no internal volume.

Comments:
 One or two comments about them being so light they can slide off your head when digging (depending how much hair you have)  you need to have them the correct way around R&L on ear cups.
Initially people are put off by the straight lead but once used in the field correctly they become converted, personally I only use headphones with a straight lead it is so much easier.

 

Tips on keeping your headphones alive
Headphone leads will eventually develop an internal wire break, no matter how good quality the lead is, a quick simple repair is to swap the lead for a new one if your  headphones have a reversable lead system, sometimes it is not the lead at fault but the plastic socket inside the headphones...again this is another component that can take a lot of strain.
We believe the best way to prolong the life of your headphones is to use a headphone saver kit which costs around £15 inc post.

Special pre Christmas offer now on
 (straight lead kit only)
visit the sales page

The kit consists of a lenth of good quality cable or curly lead fitted with a male and female plug at each end see pic 1

 

Attached to the lead is a "c" clip, this will then be attached to your belt loop or finds pouch etc, the jack plug will go into the machines headphone socket and the other end will be on your belt next to the clip.

 

This way your original headphone lead will take no strain at all, it can be left loose or tucked inside your coat as Barry is demonstrating in the pictures below.

 
Contact me at garysdetecting@hotmail.com